Omron ZW Series User Manual page 189

Command
Format
name
VR VR <delimiter>
CA CA <0> <delimiter>
LS *2 LS <save intervals>
<save count>
<delimiter>
LE *2 LE <delimiter>
*2
LO LO <task number>
LC *2 LC <<delimiter>
LI *2 LI <delimiter>
DV DV <delimiter>
*1 If the command was not successfully processed, "ER <delimiter>" is returned.
*2 This can only be used via Ethernet.
Return value *1
<type/version> Acquires the system version information.
<delimiter> EX. ZW-C10 1.100 <delimiter>
OK <delimiter> Calibrates the Sensor Head.
OK <delimiter> Starts the internal logging of the data.
OK <delimiter> Ends the internal logging of the data.
OK <delimiter> Acquires the internal logging data.
OK <delimiter> Clears the internal logging data.
<Operation status> Acquires the internal logging information.
<Saved data count>
<delimiter>
OK <delimiter> Saves all bank data and system settings to
EEPROM.
Connecting Using RS-232C Cable
Details
Chapter 5
Refer
p.5-24
p.5-25
p.5-26
p.5-27
p.5-27
p.5-28
p.5-29
p.5-30
ZW
5-13
User's Manual