Omron ZW Series User Manual page 76

Chapter 2
Functions and Operations during Measurement
■ Teaching
Performs measurement and uses the measurement results to set threshold values.
Threshold sample
(upper limit)
Hold, trigger, and scaling settings that have been made before teaching are reflected in
the teaching measurements.
As an example, here is an explanation of the procedure for setting the current
measured value as a HIGH threshold value.
Operating procedure
Steps
1
2
3
4
5
6
ZW
2-18
User's Manual
Sensor head
Teaching point
= HIGH threshold value
Key operation Display
RUN RUN
FUN FUN
H L
L
TEACH TEACH
ZERORST/ ESC ZERORST/ ESC
ZERO/ SET ZERO/ SET
Sensor head
Threshold sample
(lower limit)
RUN RUN
Press key for two seconds to enter the FUN
UNLIT
FUN FUN
L
TEACH TEACH
mode.
RUN RUN
Press or keys to select either of "MEAS" and
press key.
ZERO/ SET ZERO/ SET
Press or keys to select either of "TASK1"
and press key.
ZERO/ SET ZERO/ SET
Press or keys to select either of "JUDGE"
and press key.
ZERO/ ZERO/ SET SET
Press or keys to select either of "TEACH"
and press key.
ZERO/ SET ZERO/ SET
Select "HIGH threshold value" as the threshold value
type.
Press or keys to select either of "H.JUDGE"
and press key.
ZERO/ ZERO/ SET SET
Teaching point
= LOW threshold value
Description