Omron ZW Series User Manual page 107

Setting [Display]
Auto peak [AUTOPK]
Auto bottom [AUTOBT]
Auto peak to peak
[AUTOPP]
Average [AVE]
Sample [SAMPLE]
Holds the "maximum value" of the measurement result. The output
changes every time the maximum value is updated.
Holds the "minimum value" of the measurement result. The output
changes every time the minimum value is updated.
Holds the difference between the maximum and minimum values
of the measurement result. The output changes every time the
maximum or the minimum value is updated.
0
Holds the average measured value during the sampling period.
The output changes at the end of the sampling period and is held
until the end of the next sampling period.
Current
measured value
Sampling period
Holds the measured value at the start of the sampling period. The
output changes at the start of the sampling period and is held until
the start of the next sampling period.
Current
measured value
Sampling period
Setting the Output Conditions
Description
Output
(Max.value)
Current
measured value
Current
measured value
Output
(Min.value)
Output
(Max.value - Min.value)
Current
measured value
Output
(Average)
Output
Chapter 3
ZW
3-29
User's Manual