Omron ZW Series User Manual page 155

■ GATE signal setting
Sets the output time for the synchronization signal (GATE) for taking in signals
externally.
Setting [Display]
GATE period [GATE]
As an example, here is an explanation of the procedure for setting the output time to
"100 ms".
Operating procedure
Steps Key operation
1 - 3 For moving to BINARY, see steps 1 to 3 in p.4-22
4
ZERORST/ ZERORST/ ESC
ZERO/ SET ZERO/
5
ZERORST/ ESC ZERORST/
ZERO/ SET ZERO/
6
RUN RUN
FUN FUN
L
TEACH TEACH
The GATE signal is output for the set time.
Display
ESC
SET
ESC
SET
LIT
H L RUN RUN
Description
Description
Press or keys to select either of "GATE" and
press key.
ZERO/ ZERO/ SET SET
Set "100" as the output time.
The current setting value is displayed on the sub-
display.
Press key to enter the editing mode, and the
ZERO/ SET ZERO/ SET
sub-display blinks.
To edit numerical values use
Enter "100" and press
ZERO/ ZERO/ SET SET
RUN RUN
Press key for two seconds to enter the RUN
FUN FUN
L
TEACH TEACH
mode.
Chapter 4
Settings for I/O
/ / / keys.
key.
ZW
User's Manual
4-27