Omron ZW Series User Manual page 120

Chapter 3
Setting the Output Conditions
As an example, here is an explanation of the procedure for selecting the "ON"
(Enabled) zero reset memory setting.
Operating procedure
Steps
1
2
3
4
5
ZW
3-42
User's Manual
Key operation Display
RUN RUN
FUN FUN
H L
L
TEACH TEACH
ZERORST/ ESC ZERORST/ ESC
ZERO/ SET ZERO/ SET
ZERORST/ ESC ZERORST/ ESC
ZERO/ ZERO/ SET SET
RUN RUN
FUN FUN
H L
L
TEACH TEACH
RUN RUN
Press key for two seconds to enter the FUN
UNLIT
FUN FUN
L
TEACH TEACH
mode.
RUN RUN
Press or keys to select either of "SYSTEM"
and press key.
ZERO/ ZERO/ SET SET
Press or keys to select either of "ZER.MEM"
and press key.
ZERO/ SET ZERO/ SET
Enable the zero reset memory.
The current setting value is displayed on the sub-
display.
Press / keys to enter the editing mode, and the
sub-display blinks.
Select "ON" and press
RUN RUN
Press key for two seconds to enter the RUN
LIT
FUN FUN
L
TEACH TEACH
mode.
RUN RUN
Description
key.
ZERO/ SET ZERO/ SET