Omron ZW Series User Manual page 136

Chapter 4
I/O Signal Functions
● ENABLE output
ENABLE output
● ZERO input
ZERO input
● RESET input
RESET input
● TIMING input
TIMING input
● LED OFF input
LED OFF input
ZW
4-8
User's Manual
Name
This turns ON when the sensor is ready for measurement.
This output is interlocked with the ENABLE indicator.
Name
This is used to execute and clear a zero reset.
Name
This resets all executing measurements and outputs.
While a RESET is being input, judgment output conforms to the non-
measurement setting.
If this RESET input switches ON while the hold function is used, the state in
effect before the hold function was set will be restored.
Name
This timing input is for signal input from external devices. Use it for hold
function timing.
Name
This LED-OFF signal puts out the measurement LED.
While LED-OFF is being input, the analog output, binary output, and judgment
output conform to the non-measurement setting.
Description
Description
Description
Description
Description