Omron ZW Series User Manual page 71

■ Threshold values change
The threshold value for the task displayed on the main display in RUN mode can be
changed.
To change the target task, change the task displayed on the main display.
Display details change p.2-12
As an example, here is an explanation of the procedure for setting the HIGH threshold
value by entering "1.000" directly.
Operating procedure
Steps Key operation
1
RUN RUN
FUN FUN
L
TEACH TEACH
2
ZERORST/ ESC ZERORST/
ZERO/ SET ZERO/
3
ZERORST/ ESC ZERORST/
ZERO/ SET
ZERO/
4
ZERORST/ ESC ZERORST/ ESC
Functions and Operations during Measurement
Display
LIT
H L RUN RUN
ESC
SET
ESC
LIT
SET
H L RUN RUN
LIT
H L RUN RUN
Description
RUN RUN
Press key in the RUN mode to display the
FUN FUN
L
TEACH TEACH
setting menu.
Press or keys to select either of "H.JUDGE"
and press key.
ZERO/ ZERO/ SET SET
Set "1.000" as the HIGH threshold value.
The current measured value is displayed on the main
display and the current set threshold value is
displayed on the sub-display. (At that time, the
THRESHOLD-H indicator lights up.)
Press key to enter the editing mode, and the
ZERO/ ZERO/ SET SET
sub-display blinks.
To edit numerical values use
Enter "1.000" and press
ZERO/ SET ZERO/
ZERORST/ ESC ZERORST/ ESC
Press key in the RUN mode to exit the setting
menu.
Chapter 2
/ / / keys.
key.
SET
ZW
User's Manual
2-13