Omron ZW Series User Manual page 187

■ Setting the delimiter
Set the delimiter for RS-232C communication.
Setting [Display]
CR [CR]
(default value)
LF [LF]
CR+LF [CRLF]
Operating procedure
Steps Key operation
1 - 3 For moving to COM, see steps 1 to 3 in p.5-6
4
ZERORST/ ESC
ZERORST/
ZERO/ SET ZERO/
5
ZERORST/ ESC ZERORST/
ZERO/ SET ZERO/
6
RUN RUN
FUN FUN
L
TEACH TEACH
delimiter: CR
delimiter: LF
delimiter: CR+LF
Display
ESC
SET
ESC
SET
LIT
H L RUN RUN
Connecting Using RS-232C Cable
Description
Description
Press or keys to select either of "DATA" and
press key.
ZERO/ SET ZERO/ SET
Select the delimiter.
The current setting value is displayed on the sub-
display.
Press / keys to enter the editing mode, and the
sub-display blinks.
Select the delimiter and press
RUN RUN
Press key for two seconds to enter the RUN
FUN FUN
L
TEACH TEACH
mode.
Chapter 5
key.
ZERO/ SET ZERO/ SET
ZW
5-11
User's Manual