Omron ZW Series User Manual page 157

As an example, here is an explanation of the procedure for setting the processing for
when measurement is not possible to "Clamp".
Operating procedure
Steps Key operation
1
RUN RUN
FUN FUN
L
TEACH TEACH
2
ZERORST/ ESC ZERORST/ ESC
3
ZERO/ SET ZERO/ SET
4
ZERORST/ ESC ZERORST/ ESC
ZERO/ SET ZERO/ SET
Display
RUN RUN
Press
UNLIT
FUN FUN
L
TEACH TEACH
mode.
H L RUN RUN
Press
press
ZERO/ SET ZERO/ SET
Press
and press
Select "Clamp" as the processing for when
measurement is not possible.
The current setting value is displayed on the sub-
display.
Press /
sub-display blinks.
Select "CLAMP" and press
Settings for I/O
Description
key for two seconds to enter the FUN
or keys to select either of "I/O" and
key.
or keys to select either of "HLD.RST"
key.
ZERO/ SET SET
ZERO/
keys to enter the editing mode, and the
key.
ZERO/ SET ZERO/ SET
Chapter 4
ZW
4-29
User's Manual