Omron ZW Series User Manual page 48

Chapter 1
About Installation and Connection
Steps
5
When Sensor Head calibration fails
If the Sensor Head is calibrated in an inappropriate environment, an error is displayed on the main
display. If this happens, press
continues even after calibrating the Sensor Head in an appropriate environment, the fiber connector on
the Sensor Head or controller may be stained. Clean the fiber cable referring to p.1-16.
ZW
1-20
User's Manual
Key operation Display
RUN RUN
FUN FUN
H L
L
TEACH TEACH
ZERORST/ ESC ZERORST/ ESC
RUN RUN
Press key for two seconds to enter the RUN
LIT
FUN FUN
L
TEACH TEACH
mode.
RUN RUN
key to return to the previous screen and try again. If an error
Description