Ruggedcom Ape Module - Siemens RUGGEDCOM RX1511 Installation Manual

Chapter 3
Communication Ports
LED
Tx
Rx
Tx
Pin-Out
The following is the pin-out for the DDS RJ-48S ports:
8
Figure 48: DDS RJ-48S Pin
Section 3.8

RUGGEDCOM APE Module

The RX1511 supports various versions of the RUGGEDCOM APE (Application Processing Engine) module. The
APE is an x86-based computer design that can host a variety of x86-based operating systems. It also features
Gigabit Ethernet (GbE) ports, USB ports and a DVI-D video port. For more information about RX1511 APE,
including installation and setup instructions, refer to the RUGGEDCOM APE User Guide.
CAUTION!
Electrical hazard – risk of power failure. Installing more APE modules than allowed can lead to power
fluctuations and irregular shut downs. Do not install more than two APE modules on the device.
Figure 49: RUGGEDCOM APE Module
For specifications, refer to
32
LED Color Status
The interface is receiving or transmitting an RAI (Remote Alarm Indication) or AIS
(Alarm Indication Signal) alarm.
Off The interface is disabled.
1
Section 4.8, "RUGGEDCOM APE
Pin Name
1 R1
2 T1
3 Reserved (Do Not Connect)
4 Reserved (Do Not Connect)
5 Reserved (Do Not Connect)
6 Reserved (Do Not Connect)
7 T
8 R
Specifications".
RUGGEDCOM RX1511
Installation Guide
Description
Transmit data to
network (Ring 1)
Transmit data to network (Tip 1)
Receive data from
network (Ring)
Receive data from network (Tip)
RUGGEDCOM APE Module