Set Windows Network Properties - Siemens SIMATIC NET CP 1515 Manual

,QVWDOO 'ULYHUV
 'ULYHU ,QVWDOODWLRQ IRU :LQGRZV
Most Microsoft Windows operating systems support "Plug & Play" for
PC Cards. Once you insert the PC Card into your computer, these operating
systems will automatically:
• Detect the card, and enable the driver, or
$GG 1HZ +DUGZDUH
• Start the
driver, when the operating system cannot find the required driver.
This would typically occur when inserting the SIMATIC NET PC Card into
your computer for the very first time.
When Windows starts the
1. Follow the instructions on your screen.
2. When you are prompted to locate the driver installation files, insert the
Siemens CD-ROM and navigate to the root directory of this.
When finished installing the drivers, Windows automatically opens the
$GG(GLW &RQILJXUDWLRQ 3URILOH
3. Continue with chapter
127(
i
If your computer does not detect the new hardware you can consult
chapter
26
$GG 1HZ +DUGZDUH
"2.4 Set Windows Network Properties" (page
"B Troubleshooting" (page
wizard and prompt you to install the
wizard:
window.
57).
Industrial Ethernet Wireless LAN CP 1515
27).
C79000-G8976-C169-01