Table of Contents
Advertisement
Configuration
The following sections describe how to configure your RUGGEDCOM APE module.
Before using the RUGGEDCOM APE, create a backup image that can be restored
should the module be configured improperly.
Warranty does not support modules rendered inoperable/inaccessible due to
configuration errors made by the user.
2.1
Logging in to RUGGEDCOM APE
Use the following default username and password to log in to the RUGGEDCOM APE:
Security hazard – risk of unauthorized access
To prevent unauthorized access to the device, make sure to change the default
password before commissioning the device.
Windows® 10 Enterprise 2019
LTSC
Linux
2.2
Adding a User (Linux Only)
To add a new user, type:
adduser { name }
Where:
•
Use strong passwords. Avoid weak passwords such as password1, 123456789,
abcdefgh, etc.
Follow the instructions provided to complete the user profile. For example:
RUGGEDCOM APE (Application Processing Engine)
Configuration Manual, 08/2023, C79000-G8976-1415-06
NOTICE
NOTICE
Software Platform
{ name } is the name of the user
NOTICE
Default Username
There is no default username or password for Windows®10
Enterprise 2019 LTSC installations. The username and password is
set by the user during the first boot.
root
Default Password
admin
2
13
Advertisement
Table of Contents
