Table of Contents
Advertisement
The network name should be the same for all wireless network
interfaces that will service wireless stations that belong to the network.
The network name distinguishes your Access Points RLMs from Access
Points RLMs that belong to a neighboring network.
For information on other Interface parameters (like the
4. When finished changing parameters, click
to the Access Point RLM and to return to the main RLM Manager
window (as pictured in
At this stage, the IP address and other settings are stored in the volatile
memory of the RLM.
!
This will complete the basic configuration of your RLM. This basic
configuration will work efficiently in most networking situations. You are
advised to make a back-up file of this configuration as described in
Create a Back-up of the Configuration (page
More advanced parameter settings are discussed in
Configurations (page
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
button), see
Advanced Network Configurations (page
Figure 11 Main RLM Manager
190).
to save the configuration
window).
66).
Advanced Network
and
190).
Step 4 -
65
Advertisement
Table of Contents
