Siemens SINAMICS G120 Operating Instructions Manual page 87

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Connections for frame sizes FSD ... FSF

The line and motor connections have covers to prevent them from being touched.

You must open the cover to connect the line and motor:

1. Release the catches on both sides of the covers using a screwdriver.

2. Swivel the covers upwards.

Close the covers once you have connected the line and motor.

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

4.4 Connecting the line supply and motor