Siemens SINAMICS G120 Operating Instructions Manual page 261

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Under the following conditions, the inverter switches from the main setpoint to other setpoints:

● When the technology controller is active and appropriately interconnected, its output

specifies the motor speed.

● When jogging is active

● When controlling from an operator panel or the STARTER PC tool.

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

Advanced commissioning

6.18 Setpoints