Siemens SINAMICS G120 Operating Instructions Manual page 156

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Commissioning

5.5 Restoring the factory setting

7. Switch off the inverter power supply.

8. Wait until all LEDs on the inverter are dark.

9. Switch on the inverter power supply again.

You have restored the safety function settings of your inverter to the factory settings.

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG