Motorized Potentiometer As Setpoint Source - Siemens SINAMICS G120 Operating Instructions Manual
Low voltage inverters
built-in units with cu250s-2 control units and
encoder evaluation
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Advanced commissioning
6.18 Setpoints
6.18.4
Motorized potentiometer as setpoint source
Function description
The "Motorized potentiometer" function emulates an electromechanical potentiometer. The
output value of the motorized potentiometer can be set with the "higher" and "lower" control
signals.
Figure 6-35
Figure 6-36
Example
Setting with the motorized potentiometer as setpoint source:
Parameter
p1070 = 1050
264
Motorized potentiometer as setpoint source
Function chart of the motorized potentiometer
Description
Interconnects the main setpoint with the motorized potentiometer output.
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Advertisement
Table of Contents
