Siemens SINAMICS G120 Operating Instructions Manual page 107

Default setting 15: "Process industry"
MOP = motorized potentiometer
DO 0: p0730, DO 1:
p0731
Motorized potentiometer setpoint after ramp-function generator: r1050
Speed setpoint (main setpoint): p1070[0] = 755[0], p1070[1] = 1050
Designation in the BOP-2: Proc
Default setting 17: "2-wire (forw/backw1)"
DO 0: p0730, DO 1:
p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in the BOP-2: 2-wIrE 1
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
4.5 Connecting the interfaces for the inverter control
AO 0: p0771[0], DI 0: r0722.5, ..., DI 4: r0722.5
AO 1: p0771[1]
AO 0: p0771[0], DI 0: r0722.2, ..., DI 2: r0722.2
AO 1: p0771[1]
Installing
AI 0: r0755[0]
AI 0: r0755[0]
105