Adapting The Encoder Data - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Commissioning

5.4 Quick commissioning with a PC

Adapting the encoder data

Preconditions

● You have selected an encoder type that does not precisely match your encoder, because

it is not included in the list of default encoder types.

● You have completely configured the drive.

1. Select the "Motor encoder" screen form.

2. Select the "Encoder data" button.

3. You have access to the following settings in the "Encoder data" screen form:

– You can change all of the encoder data.

– You can select another encoder type. Startdrive only lists the encoder types that are

If you wish to set another encoder interface, you must restart the commissioning Wizard.

You have adapted the encoder data.

permitted for the configured interface.

Setting an absolute encoder (Page 507)

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG