Loading The Settings Into The Inverter - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Loading the settings into the inverter

1. Select your drive.

2. Press the "Load to device" button.

3. ☑ In the following screen form, select "Back up parameter assignment in the EEPROM".

4. Load your settings into the inverter.

5. Wait until loading has been completed.

You have loaded your settings to the inverter.

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

5.4 Quick commissioning with a PC

Commissioning