Siemens SINAMICS G120 Operating Instructions Manual page 105

Default setting 12: "Standard I/O with analog setpoint"
DO 0: p0730, DO 1:
p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in the BOP-2: Std ASP
Default setting 13: "Standard I/O with analog setpoint and safety"
DO 0: p0730, DO 1:
p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in the BOP-2: ASPS
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
4.5 Connecting the interfaces for the inverter control
AO 0: p0771[0], DI 0: r0722.0, ..., DI 2: r0722.2
AO 1: p0771[1]
AO 0: p0771[0], DI 0: r0722.0, ..., DI 5: r0722.5
AO 1: p0771[1]
Installing
AI 0: r0755[0]
AI 0: r0755[0]
103