Siemens SINAMICS G120 Operating Instructions Manual page 231

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Runtime group

Run sequence

MFP - pulse generator

Runtime group

Run sequence

MUL (multiplier)

Runtime group

Run sequence

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

The pulse generator generates a pulse with a fixed duration.

The rising edge of a pulse at input I sets output

Q = 1 for pulse duration T.

The pulse generator cannot be subsequently triggered.

Y = X0 × X1 × X2 × X3

The function block multiplies inputs X0 ... X3, and limits the

result in the range -3.4E38 ... 3.4E38.

p20110[0 ... 3]

Advanced commissioning

6.14 Free function blocks

p20114[0 ... 3]