Screw for functional grounding on the converter, frame size FSG
If you wish to use the inverters with integrated C3 line filter, please note the information in the
sections "TN line system", "TT line system" and "IT system" below.
Figure 4-7
4.4.1.1
TN line system
A TN line system transfers the PE protective
conductor to the installed plant or system us‐
ing a cable.
Generally, in a TN line system the neutral
point is grounded. There are versions of a TN
system with a grounded line conductor, e.g.
with grounded L1.
A TN line system can transfer the neutral con‐
ductor N and the PE protective conductor ei‐
ther separately or combined.
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Remove screw for functional grounding
4.4 Connecting the line supply and motor
Installing
73