Description - Siemens SINAMICS G120 Operating Instructions Manual

Description

Use for the intended purpose
The inverter described in this manual is a device to control a three-phase motor. The inverter
is designed for installation in electrical installations or machines.
It has been approved for industrial and commercial use on industrial networks. Additional
measures have to be taken when connected to public grids.
The technical specifications and information about connection conditions are indicated on the
rating plate and in the operating instructions.
Use of third-party products
This document contains recommendations relating to third-party products. Siemens accepts
the fundamental suitability of these third-party products.
You can use equivalent products from other manufacturers.
Siemens does not accept any warranty for the properties of third-party products.
Use of OpenSSL
This product contains software developed in the OpenSSL project for use within the OpenSSL
toolkit.
This product contains cryptographic software created by Eric Young.
This product contains software developed by Eric Young.
Further information is provided on the Internet:
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
OpenSSL (https://www.openssl.org/)
Cryptsoft (mailto:eay@cryptsoft.com)
3
29