Siemens SINAMICS G120 Operating Instructions Manual page 368

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Saving the settings and series commissioning

7.1 Saving settings on a memory card

Manually backing up

Preconditions

● The inverter power supply has been switched on.

● No memory card is inserted in the inverter.

Procedure with Startdrive

1. Go online.

2. Select "Online & diagnostics".

3. Select "Backing up/reset".

4. Back up the settings to the EEPROM of the inverter.

5. Select the settings as shown in the diagram.

6. Start data transfer

7. Wait until Startdrive reports that data backup has been completed.

You have backed up the inverter settings to a memory card.

Procedure with the BOP-2

1. Remove any USB cable that is inserted in the inverter.

2. In the "OPTIONS" menu, select "TO CARD".

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

Converter with the CU250S-2 Control Units