Transferring The Setting From The Memory Card - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Saving the settings and series commissioning

7.1 Saving settings on a memory card

Transferring the setting from the memory card

Automatically transferring

Precondition

The inverter power supply has been switched off.

1. Insert the memory card into the inverter.

2. Then switch on the inverter power supply.

If there is valid parameter data on the memory card, then the inverter accepts the data from

the memory card.

Manually transferring

Preconditions

● The inverter power supply has been switched on.

● No memory card is inserted in the inverter.

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG