Expert - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Expert

Procedure without application class or for the application class [0]: Expert

The wizard only displays the "setpoint input" if you configured an inverter with PROFINET or

PROFIBUS interface.

Select whether the inverter is connected to a higher-level control via the fieldbus.

Select whether the ramp-function generator for the speed setpoint is implemented in the higher-

level control or in the inverter.

Select the required function modules for your application.

Select the control mode.

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

Inverter function modules (Page 132)

Commissioning

5.4 Quick commissioning with a PC