Setpoints; Overview - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Advanced commissioning

6.18 Setpoints

The inverter receives its main setpoint from the setpoint source. The main setpoint mainly

specifies the motor speed.

You have the following options when selecting the source of the main setpoint:

● Inverter fieldbus interface

● Analog input of the inverter

● Motorized potentiometer emulated in the inverter

● Fixed setpoints stored in the inverter

● Probe: The inverter converts a sequence of pulse signals at the digital input into an analog

You have the same selection options when selecting the source of the supplementary setpoint.

Setpoint sources for the inverter

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG