5.3 Parameter Settings
5.3.1 Parameter Settings in Configurator PM7
Use the Configurator PM7 to allocate the most fundamental parameters for positioning control,
such as the motor rotation direction, pulse output method (CW/CCW and Pulse/Sign), home
input, limit input logic, and positioning control. The following procedure is explained on the
condition that the Configurator PM7 has already started.
PROCEDURE
1. Select "Set axis" → "Set parameters" from the menu bar.
The parameter dialog box will be displayed.
2. Make necessary parameter settings according to the application and press
the [OK] button.
3. Select "File" → "Save Config" from the menu bar.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
5.3 Parameter Settings
5-7