Positioning Control Area - Panasonic FP7 User Manual

17.4.7 Positioning Control Area

• Set the number of repetitions of positioning control per axis.
• The positioning unit repeats positioning control for the number of repetitions set and finishes
operating.
The number of repetitions will be reset to the default value on completion of positioning control.
Unit
memory no.
(Hex)
Number of 1st
UM 00108 axis positioning
repetitions
Number of 2nd
UM 00109 axis positioning
repetitions
Number of 3rd
UM 0010A
axis positioning
repetitions
Number of 4th
UM 0010B axis positioning
repetitions
Number of
Virtual axis
UM 0010F
positioning
repetitions
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Stores the number of times for repeating the
operation starting from the positioning control
starting table number of the 1st axis until the E-
point.
If 255 is stored, the positioning unit repeats
positioning control an unlimited number of times
until you manually stop the operation.
Stores the number of times for repeating the
operation starting from the positioning control
starting table number of the 2nd axis until the E-
point.
If 255 is stored, the positioning unit repeats
positioning control an unlimited number of times
until you manually stop the operation.
Stores the number of times for repeating the
operation starting from the positioning control
starting table number of the 3rd axis until the E-
point.
If 255 is stored, the positioning unit repeats
positioning control an unlimited number of times
until you manually stop the operation.
Stores the number of times for repeating the
operation starting from the positioning control
starting table number of the 4th axis until the E-
point.
If 255 is stored, the positioning unit repeats
positioning control an unlimited number of times
until you manually stop the operation.
Stores the number of times for repeating the
operation starting from the positioning control
starting table number of the virtual axis until the
E-point.
If 255 is stored, the positioning unit repeats
positioning control an unlimited number of times
until you manually stop the operation.
17.4 Details of Common Area in Unit Memory
Description Default Setting range
0 0 to 255 Times
0 0 to 255 Times
0 0 to 255 Times
0 0 to 255 Times
0 0 to 255 Times
Set unit
17-21