System Operation Setting Area - Panasonic FP7 User Manual

17.4.12 System Operation Setting Area

This is an area for changing the operation of the positioning unit.
Unit
memory no.
(Hex)
Deceleration stop
UM 00389
operation
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Specify the operation of the positioning unit with the deceleration stop request
signal activated (turned ON).
0: Deceleration stop
While the positioning unit is in repetitive operation, the positioning unit will
come to a stop after the position moves to E-point of the repetitive target.
1: Pause
• Performs a deceleration stop, and positioning will restart when the
deceleration stop request signal is canceled (turned OFF).
• The positioning unit will perform the same operation as a deceleration stop
unless the positioning unit is in positioning operation.
• While the positioning unit is in repetitive operation, the positioning unit will
come to a stop after the position moves to the E-point of the repetitive target,
and repetitive operation will restart when the deceleration stop request signal
is canceled (turned OFF).
• If a system stop or emergency stop is executed while the positioning unit is
paused, the pause state will be canceled and the operation will not restart
with the deceleration stop request signal is canceled (turned OFF).
Default: 0
17.4 Details of Common Area in Unit Memory
Description
17-31