Entire Configuration Of Memory Unit Area - Panasonic FP7 User Manual

17.3 Entire Configuration of Memory Unit Area

The unit memory is in control of parameter and positioning data set values for the positioning
unit.
All set values are set with the programming tool software or a user program.
Area name
Common
area
Each axis
information
area
(Note)
Each axis
setting
(Note): Check that the positioning done flag (X0) is turned ON in the case of reading each axis information area with a
program.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Unit memory
address
Setting parameter control area
Operating speed factor area
Axis group setting area
Current value update data area
Positioning table setting area
UM 00000
Positioning control area
to UM 003FF
Error annunciation & clear area
Warning annunciation & clear area
Pulse count control area
Synchronous control monitor area
System operation setting area
1st axis
2nd axis
UM 00400
3rd axis
to UM 007FF
4th axis
Virtual axis
UM 00800
1st axis
to UM 02FFF
UM 03000
2nd axis
to UM 05FFF
UM 05800
3rd axis
to UM 07FFF
UM 08000
4th axis
to UM 0AFFF
UM 12000
Virtual axis
to UM 147FF
17.3 Entire Configuration of Memory Unit Area
Name of each individual area
Each axis information & monitor area
Each axis information & monitor area
Each axis information & monitor area
Each axis information & monitor area
Each axis information & monitor area
Parameter setting area
Positioning data setting area
(600 standard points and 25 expansion points)
Parameter setting area
Positioning data setting area
(600 standard points and 25 expansion points)
Parameter setting area
Positioning data setting area
(600 standard points and 25 expansion points)
Parameter setting area
Positioning data setting area
(600 standard points and 25 expansion points)
Parameter setting area
Positioning data setting area
(600 standard points and 25 expansion points)
17-15