List Of Warning Codes; Unit Warning (From B000H) - Panasonic FP7 User Manual

Positioning unit
Hide thumbs Also See for FP7:
Table of Contents

Advertisement

Errors and Warnings

15.4 List of Warning Codes

15.4.1 Unit Warning (from B000H)

These are the warning codes to be given when the warnings occurred in the positioning unit.
Error
Error name
code
B000H
Tool operation
B010H
Duplicate start
J-point
B030H
simultaneous
start warning
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
15-14
Description
The following request
signals were turned ON
by the host PLC while
the positioning unit is in
tool operation.
• Positioning start
request flag (each
axis)
• Home return
request flag (each
axis)
• JOG
forward/reverse
rotation request flag
(each axis)
The same axis was
requested to start even
though the axis
operation has not
completed.
The J-point speed
change contact and J-
point positioning start
contact turn ON
simultaneously during
the JOG positioning (J-
point) operation.
The J-point contact are
turned ON while the
system is accelerating
or decelerating the
speed
Object
Recovered
No requests from the PLC can be
executed while the positioning unit
is in tool operation.
The following requests, however,
can be executed from the PLC while
the positioning unit is in tool
operation.
Each
• Deceleration stop request flag
Yes
axis
• Emergency stop request flag
• System stop request flag (all
• Pulser operation enabled flag
No requests to any axes in
operation can be executed.
The following requests, however,
can be executed while the
positioning unit is in operation.
Each
• Deceleration stop request flag
Yes
axis
• Emergency stop request flag
• System stop request flag (all
When the both contacts turn ON
simultaneously, the J-point
positioning start contact will have a
priority, and the J-point speed
Each
change contact will be ignored.
Yes
axis
Make settings so that the J-point
speed change contact will be turned
ON while the positioning unit is in
operation at constant speed.
Countermeasures
(each axis)
(each axis)
axes)
(each axis)
(each axis)
(each axis)
axes)

Advertisement

Table of Contents
loading

Table of Contents