Panasonic FP7 User Manual page 203

Contact
Target axis
allocation
Y1F Virtual axis
Y20
1st axis
Y21
Y22
2nd axis
Y23
Y24
3rd axis
Y25
Y26
4th axis
Y27
Y28
−
|
Y2E
Y2E
Virtual axis
Y2F
Y30 1st axis
Y31 2nd axis
Y32 3rd axis
Y33 4th axis
Y34
−
|
Y36
Y37 Virtual axis
Y38 1st axis
Y39 2nd axis
Y3A 3rd axis
Y3B 4th axis
Y3C
−
|
Y3E
Y3F Virtual axis
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Requests the home return of the virtual axis. The home return of
Home return start
the virtual axis is possible only by data setting.
JOG forward
JOG reverse
Requests the JOG operation for the corresponding axis.
JOG forward
(The operation is of level type.)
JOG reverse
JOG forward
If this contact turns ON while the positioning unit is in tool
JOG reverse
operation, a warning will be output.
JOG forward
JOG reverse
− −
JOG forward
Requests the JOG operation of the virtual axis.
(The operation is of level type.)
JOG reverse
Requests the emergency stop of the corresponding axis.
Emergency stop (The operation is of level type.)
Note) The deviation counter cannot be cleared.
− −
Emergency stop Requests the emergency stop of the virtual axis.
Requests the deceleration stop of the corresponding axis.
Deceleration stop (The operation is of level type.)
Note) The deviation counter cannot be cleared.
− −
Deceleration stop Requests the principle stop of the virtual axis.
17.2 I/O Number Allocation
Description
17-11