Logging in
If you set a password in the Console/Comm Port Configuration screen
(Figure 82 on page
for a username and password as shown in
and RO).
Figure 83 Login screen
Ethernet Switch 425-48T HW:0C
Enter text, press <Return> or <Enter> when complete.
Enter a valid username and password and press Enter. You are then directed to the
Console Interface main menu.
For information about modifying the existing usernames, see Configuring and
Managing Security for Nortel Ethernet Switches 325 and 425, Software
Release 3.6 (320988-A).
Chapter 6 System configuration using the Console Interface
224), the next time you access the switch, you are prompted
Username:
[ RW ]
Password:
[ *************** ]
Enter Password: ********
Figure 83
(default usernames are RW
FW 3.5.0.2
SW 3.6.0
System Configuration Guide
231