Nortel 325-24T Configuration Manual page 391

Figure 160 Port Management page
Table 146
Table 146 Port Management page items
Item
Port
Trunk
Status
Chapter 12 Configuring the switch using Web-based management
describes the items on the Port Management page.
Range
(1) Enabled
(2) Disabled
Description
The switch port number of the corresponding row. The
values that you set in each switch row affect all switch
ports and, when the switch is part of a stack, the values
that set in the stack row affect all ports in the entire stack
(except the GBIC port or fiber optic ports when
installed).
The trunk group that the switch port belongs to as
specified in the Trunk Member fields on the MultiLink
Trunk page.
Choose to enable or disable the port. You can also use
this field to control access to any switch port.
The default setting is Enabled.
System Configuration Guide
391