Figure 19 System Characteristics screen
Operation Mode:
MAC Address:
Reset Count:
Last Reset Type:
Power Status:
Local GBIC Type:
sysDescr:
sysObjectID:
sysUpTime:
sysServices:
sysContact:
sysName:
sysLocation:
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.
Table 15 System Characteristics screen fields
Field
Operation Mode
Size of Stack
Base Unit
System Characteristics
Switch
00-0F-CD-BF-1E-80
9
Management Reset
Primary Power
port 49, None
port 50, None
Ethernet Switch 425-48T
HW:00
FW:3.5.0.2 SW:v3.6.0
1.3.6.1.4.1.45.3.57.1
7 days, 17:49:05
3
[
]
[ Ethernet 428-48T ]
[
]
Description
Read-only field that indicates the operation mode of the unit, for example:
•
When the unit is part of a stack configuration, the (read-only) field indicates the
unit is operational in a stack, and lists the current unit number of this switch.
•
When the unit is not part of a stack configuration (operating standalone), the
read-only field indicates the unit is operating as a switch. When in this operation
mode, the Size of Stack and Base Unit fields (see following description) do not
appear.
This read-only field only appears when the switch is participating in a stack
configuration. This field indicates the number of units configured in the stack
configuration (1 to 8 units maximum).
This read-only field only appears when the switch is participating in a stack
configuration. This field indicates the unit number of the switch that is currently
operating as the base unit.
Chapter 2 Using the console interface
sysNtpTime: SNTP not synchronized.
Press Ctrl-C to return to Main Menu.
System Configuration Guide
101