Changing Stack Numbering - Nortel 325-24T Configuration Manual

Table 45 Stack Information page fields (continued)
Section Field
Stack Inventory Unit
Description
Operational State
2

Changing stack numbering

If your system is set to "stack" operational mode, you can view existing stack
numbering information and renumber the devices in your stack framework.
To view or renumber devices within the stack framework:
1
Chapter 5 Using the Web-based management interface
Description
The unit number assigned to the device by the network
manager.
For more information on stack numbering, see
The description of the device or its subcomponent.
The current operational state of the stack. The operational states
are: Other, Not Available, Removed, Disabled, Normal, Reset in
Progress, Testing, Warning, Non Fatal Errors, Fatal Error, and
Not Configured.
In the lower-left corner of the Stack Information page, click the number of
the device you want to view.
The Stack Information page is updated with information about the selected
switch.
Note: The unit number does not affect the base unit designation.
From the main menu, choose Summary > Stack Numbering.
The Stack Numbering page opens (Figure 77).
System Configuration Guide
209
page 209.