sntp server primary address command
The
sntp server primary address
the primary NTP server. The syntax for the
command is:
sntp server primary address <A.B.C.D>
The
sntp server primary address
mode.
Table 85
describes the parameters and variables for the
command.
address
Table 85 sntp server primary address command parameters and variables
Parameters and
variables
<A.B.C.D>
The default is 0.0.0.0.
sntp server secondary address command
The
sntp server secondary address
of the secondary NTP server. The syntax for the
command is:
address
sntp server secondary address <A.B.C.D>
The
sntp server secondary address
mode.
Chapter 7 System configuration using the CLI 291
Description
Enter the IP address of the primary NTP server.
command specifies the IP addresses of
sntp server primary address
command is in the config command
sntp server primary
command specifies the IP addresses
sntp server secondary
command is in the config command
System Configuration Guide