Globals Tab - Nortel 325-24T Configuration Manual

340 Chapter 9 Configuring the switch using Device Manager
To open the IP dialog box:
➨
The following sections provide a description of the tabs in the Edit > IP dialog
box and details about each item on the tab.

Globals tab

To open the Globals tab:
➨
Figure 130 Globals tab
Table 126
Table 126 Globals tab fields
Field and MIB
association
DefaultTTL
ReasmTimeout
320985-A Rev 01
From the Device Manager main menu, choose Edit > IP.
The Edit IP dialog box opens with the Globals tab displayed.
From the Device Manager main menu, choose Edit > IP.
The IP dialog box opens
describes the Globals tab fields.
Description
Default value inserted into the Time-To-Live field of the IP header of
datagrams originated by the switch, whenever a TTL value is not
supplied by the transport layer protocol. Default value is 64.
Maximum number of seconds that received fragments are held while
they are awaiting reassembly by the switch. Default value is 60.
(Figure 130) with the Globals tab displayed.