Chapter 2
Using the console interface
This chapter describes how to configure and manage the Ethernet Switch 325/425
using the menu-driven Console Interface (CI).
This chapter covers the following topics:
•
•
•
Accessing the CI menus and screens
You can access the CI menus and screens locally through a console terminal
attached to your Ethernet Switch 325/425, remotely through a dial-up modem
connection, or in-band through a Telnet session. You can connect your console
cable into any unit in the Ethernet Switch 325/425-only stack for a unified stack
interface.
For information about SNMP, see your network management documentation.
"Accessing the CI menus and screens"
"Using the CI menus and screens" on page 94
"Main menu" on page 96
Note: If you have a properly configured BootP server in your network,
it detects the IP address; you will not need to configure the IP address.
System Configuration Guide
93