Table of Contents
Advertisement
Table 52 TELNET/SNMP/Web Access Configuration screen fields (continued)
Field
Description
Allowed Source
Specifies up to 10 user-assigned host IP addresses that are allowed Telnet access to the
IP Address
CI.
Default value
Range
Allowed Source
Specifies up to 10 user-assigned allowed source address masks. The remote IP address
Mask
is masked with the Allowed Source Mask and, if the resulting value equals the Allowed
Source IP address, the connection is allowed.
For example, a connection would be allowed with the following settings:
Remote IP address = 192.0.1.5
Allowed Source IP Address = 192.0.1.0
Allowed Source Mask = 255.255.255.0
Default value
Range
Software Download screen
The Software Download screens
the Ethernet Switch 325/425 software image and diagnostics image that are
located in nonvolatile flash memory.
Chapter 6 System configuration using the Console Interface
0.0.0.0 (no IP address assigned)
Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
0.0.0.0 (no IP mask assigned)
Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
Caution: Do not interrupt power to the device during the software
download process. If the power is interrupted, the firmware image can
become corrupted.
Achtung: Unterbrechen Sie die Stromzufuhr zum Gerät nicht, während
die Software heruntergeladen wird. Bei Unterbrechung der Stromzufuhr
kann das Firmware-Image beschädigt werden.
Attention: Ne pas couper l'alimentation de l'appareil pendant le
chargement du logiciel. En cas d'interruption, le programme résident
peut être endommagé.
(Figure 87
and
Figure
System Configuration Guide
89) allow you to revise
237
Hide quick links:
Advertisement
Table of Contents
