Nortel 325-24T Configuration Manual page 359

Chapter 9 Configuring the switch using Device Manager 359
➨
From the Device Manager main menu, choose Edit > File System.
The FileSystem dialog box opens
Image/Diag tab.
Figure 144 FileSystem - Config/Image/Diag File tab dialog box
Table 135 describes the FileSystem Config/Image/Diag file dialog box fields.
Table 135 FileSystem Config/Image/Diag file dialog box fields
Field Description
LoadServerAddr The IP address of the load server for the configuration file and/or the
image file. If not used, then the value is 0.0.0.0.
BinaryConfigFile Name of the configuration file currently associated with the interface.
Name When not used, the value is a zero length string.
ImageFileName Name of the image file(s) currently associated with the interface.
When the object is not used, the value is a zero length string.
FwFileName Specifies the FWFileName.
(Diag)
(Figure 144) and displays the Config/
System Configuration Guide