29-6 System Information and Diagnosis
Log and Trace
29.4
The Contivity 221 has a syslog facility for message logging, and a trace function for viewing call-
triggering packets.
Figure 29-6 Menu 24.3: System Maintenance: Log and Trace
Menu 24.3 - System Maintenance - Log and Trace
2. Syslog Logging
4. Call-Triggering Packet
Press ENTER to Confirm or ESC to Cancel
29.4.1
Syslog Logging
The Contivity 221 uses the syslog facility to log the CDR (Call Detail Record) and system
messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 - System
Maintenance - Syslog Logging, as shown next.
Figure 29-7 Menu 24.3.2: System Maintenance: Syslog Logging
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel
You need to configure the syslog parameters described in the following table to activate syslog
then choose what you want to log.
317517-A Rev 00