Register Online; Logging In And Supplying A Password - Nortel Contivity 4500 Getting Started

Extranet switch

Hide thumbs Also See for Contivity 4500:

Table of Contents

Getting Started with the Contivity Extranet Switch 4500

Register Online

Click to register the Switch with Nortel Networks. It will only take a few minutes

and it will give you access to the latest software and technical tips. Your Switch

requires Internet access in order to register.

Start up a Web browser and enter your Switch's Management IP Address. Select

an option in the navigational menu and submenu, and then you are prompted for

the Login and Password. Enter the system default Login and Password in

lowercase characters, as follows:

Password: setup

IMPORTANT: If you change your password and later need to access the

4-6

Serial Interface Configuration, you must then enter the

modified password. The factory default password is no

longer valid in this case.

Also, make sure you change the default Administrator's Login and

Password as soon as possible (refer to the Admin→Administrator

display.) You should then guard the Login and Password carefully.

Table of Contents