62
Chapter 1 About Ethernet Switches 325 and 425
AC power receptacle
The AC power receptacle accepts the AC power cord which is supplied with the
switch. For installation outside North America, make sure that you have the
proper power cord for your region. Any cord used must have a CEE-22 standard
V female connector on one end and must meet the IEC 320-030 specifications.
Table 5
Table 5 International power cord specifications
Country/Plug description
Continental Europe:
•
CEE7 standard VII male
plug
•
Harmonized cord (HAR
marking on the outside
of the cord jacket
to comply with the
CENELEC Harmonized
Document HD-21)
U.S./Canada/Japan:
•
NEMA5-15P male plug
•
UL recognized (UL
stamped on cord jacket)
•
CSA certified (CSA label
secured to the cord)
320985-A Rev 01
lists specifications for international power cords.
Specifications
220 or 230 VAC 50 Hz
Single phase
100 or 120 VAC 50–60 Hz
Single phase
Typical plug
228FA
227FA