338 Chapter 9 Configuring the switch using Device Manager
The following sections provide a description of the tabs in the Edit > Unit dialog
box and details about each item on the tab.
Unit tab
To open the Unit tab:
➨
Figure 128 Unit dialog box
Table 124
Table 124 Unit tab fields
Field
Type
Descr
Ver
Sernum
Rate Limit tab
To open the Rate Limit tab:
320985-A Rev 01
From the Device Manager main menu, choose Edit > Unit.
The Unit dialog box
describes the Unit tab fields.
Description
Specifies the type number.
Specifies the type of switch.
Specifies the hardware version number of the switch.
Specifies the serial number of the switch.
(Figure 128)
opens with the Unit tab displayed.