360 Chapter 9 Configuring the switch using Device Manager
Table 135 FileSystem Config/Image/Diag file dialog box fields (continued)
Field
Action
Status
ASCII config file
To display the ASCII Config file tab:
➨
320985-A Rev 01
Description
•
This object is used to download or upload a config file, an image
file or diag firmware file. In read operation, if there is no action
taken since the boot up, it will return with a value of other.
Otherwise, it will return the latest action.
•
In a write operation, the values that can be written are:
dnldConfig
dnldImg
upIdConfig
dnldFw
dnldImgIfNewer
dnldImgNoReset
dnldFwNoReset
•
The newly downloaded config, image or diag file will not take effect
until the next boot cycle of the device.
This object is used to get the status of the latest action as shown by
s5AgInfoFileAction. The values that can be read are:
•
other — if no action taken since the boot up
•
inProgress — the operation is in progress
•
success — the operation succeeds
•
fail — the operation failed
In the File System dialog box, click on the ASCII Config File tab.
The ASCII Config File tab
(Figure 145)
opens.