440
Default settings
Table 167 Factory default settings (continued)
Field
Bridge Priority
Bridge Priority
Root Port
Root Path Cost
Maximum Age Time
Forward Delay
Bridge Forward Delay
Tx Hold Count
Hop Count (Max)
Default Path Cost Type
Region Name
TELNET Access
SNMP Access
Web Access
Login Timeout
Login Retries
Inactivity Timeout
Event Logging
Allowed Source IP Address
(10 user-configurable fields)
Allowed Source Mask
(10 user-configurable fields)
320985-A Rev 01
Default setting
HEX: 0x0000 - 0xF000
HEX: 0x0000 - 0xF000
0
0
20 seconds
15 seconds
15 seconds
3
2000
•
32 bits in MSTP/RSTP
mode
•
16 bits in legacy
STP802.1d mode
•
Not supported in
STP802.1d mode
MAC address of the device
Enabled
Enabled
Enabled, Yes
1 minute
3
15 minutes
All
First field: 0.0.0.0
(no IP address assigned)
Remaining nine fields:
255.255.255.255
(any address is allowed)
First field: 0.0.0.0
(no IP address assigned)
Remaining nine fields:
255.255.255.255
(any address is allowed)
Appears in this CI screen
Spanning Tree Switch Settings screen
in MSTP mode (see
Configuring VLANs,
Spanning Tree, and
MultiLink Trunking for Nortel
Ethernet Switches 325 and 425,
Software Release 3.6
"TELNET/SNMP/Web Access
Configuration screen" on page 234
(320986-A))